The operating vehicles of electric vehicles are generally equipped with liquid-rich lead-acid batteries. Compared with maintenance-free batteries, these batteries are irregularly replenished with water for maintenance. For the water replenishment of the battery, the user should pay attention to the method and some details. The following editor will tell you how to add water to the electric sightseeing car?
Sightseeing vehicle battery adding water method
1. Because of the usage of rich liquid batteries, the water will lose, resulting in the liquid level drop, it is necessary to regularly unscrew the liquid hole cover, and check the liquid level in each cell of the battery.
Note: In any case, make sure that the plate inside the battery is completely covered by the liquid level. Using without water will greatly shorten the battery service life!
2.under normal circumstances, the higher the ambient temperature is, the more frequently the battery is used, the longer the use of time, the faster the loss of water. Normal liquid level check cycle: recommended once every two months in winter and once a month in summer. For batteries that have been used for more than one year, shorten the inspection period as appropriate.
3. Please be sure to use distilled or deionized water for battery replenishment. It is forbidden to use tap water, well water or river water, or directly add acid to the battery.
Note: General water impurity ion content is high, which will damage the battery!
4. Please fill the battery with water after it is fully charged. If the plate is exposed to the liquid level before charging, add an appropriate amount of pure water to cover the plate, and then add the liquid level to the specified height after charging.
5. Determine the height of the liquid level: please add water to the position about 3-4mm below the bottom of the liquid level indicator (the plastic part deep into the battery inside the liquid injection hole).
Note: Do not add too much water, the liquid level should not touch the bottom of the liquid hole plug, so as to avoid acid overflow battery!
Sightseeing car battery intelligent water replenishment system
Battery water black technology – battery intelligent water adding system: Battery intelligent water system is the company’s independent research and development of patented products, is a battery development in view of the rich fluid automatic filling equipment, can fully replace the artificial water battery maintenance operations, real-time monitoring of battery and dehydration, automatic filling water, with water induction automatic stop, after the installation of equipment can keep the electrolyte level the entire in health, to ensure that the battery electrolyte features stable, balance, Optimize the efficiency of storage battery equipment and extend the service life of storage battery.
Lham intelligent water refill system retains the advantages of high stability, strong environmental adaptability and low price of ordinary lead-acid batteries. At the same time, it has a stable service life and great maintenance convenience at a very low cost, and has a very considerable cost performance.
Precautions for adding water to batteries of electric sightseeing vehicles
1. Please fill the battery with water after it is fully charged. If the plate is exposed to the liquid level before charging, add an appropriate amount of pure water to cover the plate, and then add the liquid level to the specified height after charging.
2. Please use distilled water or deionized water for battery replenishment. It is forbidden to use tap water, well water or river water, or directly add acid to the battery.
3.under normal circumstances, the higher the ambient temperature is, the more frequently the battery is used, the longer the use of time, the faster the loss of water. Normal liquid level check cycle: recommended once every two months in winner and once a month in summer. For batteries that have been used for more than one year, shorten the inspection period as appropriate.
4. Determine the height of the liquid level: please add water to the position about 3-4mm below the bottom of the liquid level indicator (the plastic part deep into the battery inside the liquid injection hole).
5.Rich liquid battery in the use of water will naturally loss, resulting in the liquid level drop, it is necessary to regularly unscrew the liquid hole cover, check the battery in each single cell of the liquid level height.