| Item No. | Head Diameter | Screw Diameter | Screw Pitch | Length | Condition | Test Project | Test Standard | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Before acid ething | Opening valve pressure | 12.5+/-2Kpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Before acid ething | Closing valve pressure | 11.5+/-2Kpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Before acid ething | Valve pressure difference | ≤2Kpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | After acid ething | Opening pressure after acid ething | 11.5+/-3Kpa | |||||
| SP-A101-1 | Φ26 | 4 | 26.7 | After acid ething | Closing pressure after acid ething | 10+/-3Kpa | ||||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | After acid ething | Valve pressure difference after acid ething | ≤3Kpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | After acid ething | Temperature Range | -40 ℃ – +80 ℃ | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Instal Torque | Torque of cover piece | 0.8N | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Shaw a hardness | 53+/-3 | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Elongation at break after corrosion | ≥100% | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Tensile strength after corrosion | ≥5Mpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Gasket is permanently deformed(90 ℃ /22h) | ≤60% | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Air tightness after aging | Not a flat |
| Item No. | Head Diameter | Screw Diameter | Screw Pitch | Length | Condition | Test Project | Test Standard | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Before acid ething | Opening valve pressure | 12.5+/-2Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Before acid ething | Closing valve pressure | 11.5+/-2Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Before acid ething | Valve pressure difference | ≤2Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | After acid ething | Opening pressure after acid ething | 11+/-3Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | After acid ething | Closing pressure after acid ething | 10+/-3Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | After acid ething | Valve pressure difference after acid ething | ≤2Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | After acid ething | Temperature Range | -40 ℃ – +80 ℃ | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Instal Torque | Torque of cover piece | 0.8N | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Shaw a hardness | 53+/-3 | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Elongation at break after corrosion | ≥100% | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Tensile strength after corrosion | ≥5Mpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Gasket is permanently deformed(90 ℃ /22h) | ≤60% | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Air tightness after aging | Not a flat |
| Item No. | Head Diameter | Screw Diameter | Screw Pitch | Length | Condition | Test Project | Test Standard | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Before acid ething | Opening valve pressure | 12.5+/-2Kpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Before acid ething | Closing valve pressure | 11.5+/-2Kpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Before acid ething | Valve pressure difference | ≤2Kpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | After acid ething | Opening pressure after acid ething | 11.5+/-3Kpa | |||||
| SP-A101-1 | Φ26 | 4 | 26.7 | After acid ething | Closing pressure after acid ething | 10+/-3Kpa | ||||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | After acid ething | Valve pressure difference after acid ething | ≤3Kpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | After acid ething | Temperature Range | -40 ℃ – +80 ℃ | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Instal Torque | Torque of cover piece | 0.8N | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Shaw a hardness | 53+/-3 | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Elongation at break after corrosion | ≥100% | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Tensile strength after corrosion | ≥5Mpa | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Gasket is permanently deformed(90 ℃ /22h) | ≤60% | |||||
| SP-A101-1 | Φ26 | / | 4 | 26.7 | Rubber Gasket | Air tightness after aging | Not a flat |
| Item No. | Head Diameter | Screw Diameter | Screw Pitch | Length | Condition | Test Project | Test Standard | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Before acid ething | Opening valve pressure | 12.5+/-2Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Before acid ething | Closing valve pressure | 11.5+/-2Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Before acid ething | Valve pressure difference | ≤2Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | After acid ething | Opening pressure after acid ething | 11+/-3Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | After acid ething | Closing pressure after acid ething | 10+/-3Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | After acid ething | Valve pressure difference after acid ething | ≤2Kpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | After acid ething | Temperature Range | -40 ℃ – +80 ℃ | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Instal Torque | Torque of cover piece | 0.8N | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Shaw a hardness | 53+/-3 | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Elongation at break after corrosion | ≥100% | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Tensile strength after corrosion | ≥5Mpa | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Gasket is permanently deformed(90 ℃ /22h) | ≤60% | |||||
| SP-A101-2 | Φ26 | M20 | 2.5 | 26.7 | Rubber Gasket | Air tightness after aging | Not a flat |
Product Specification:
1.High stability; high chemical resistance
2.The opening and closing valve works more than 1000000 times
3.Valve core material: high performance EPDM+unique formula
4.100% full inspection, explosion-proof,pressure relief,open and close
5.Valve air pressure value and other functional detection before deliver
