As lead-acid batteries are consumable items, when the electrolyte drops to a certain level, it needs to be replenished in time. But after filling up the water, many users are eager to charge the battery, so can the battery be charged immediately after adding water? The following is a detailed answer for everyone.
Can lead-acid batteries be charged after adding water?
The lead-acid battery can be charged after adding water, but the lead-acid battery needs to be installed before charging. This is not a big problem. Be careful not to add too much water, otherwise it will come out along the cover.
If the water in the battery is not enough, it needs to be added before charging. If water is added after charging, the current state of the battery will not change.
Generally, lead-acid batteries can be fully charged within 16 hours after adding water. The lead plates of water-filled batteries are soaked in electrolyte, and the lead plates of maintenance-free batteries are wrapped with something like a cotton pattern, which is filled with electrolyte.
An appropriate amount of distilled water or refill should be injected. Look inside with a flashlight, it’s full. Once added, a decent amount of butter can be applied to the terminals of each battery.Prevent battery volatilized electrolyte from corroding terminal posts.
What water to add to lead-acid batteries?
The main advantage of adding sulfuric acid aqueous solution to lead-acid batteries is that it can maintain voltage stability and the price is relatively affordable; but the disadvantages are low specific energy and short service life, which is not conducive to daily maintenance.
Batteries currently on the market are generally divided into two types: water-filled lead-acid batteries and maintenance-free lead-acid batteries. More than 80% of the batteries used in the market at this stage are maintenance-free lead-acid batteries.
Lead-acid battery water adding tool introduction
Therefore, water can be added to the battery that supports water addition, but manual water addition is prone to omissions. Insufficient or excessive water addition will affect the balance of Xu TV characteristics and affect the service life of the battery. Use the battery water gun to replenish the battery with distilled or deionized water. The muzzle limit stopper controls the liquid level height, and the water full sensor stops automatically. Equipped with a mobile power supply and a portable storage box, it is easy to carry and use at any time.
The battery water gun is self-developed and produced by our company. It is a special tool for water maintenance of lead-acid batteries. It can make water maintenance more efficient and convenient, and can solve the problems of inaccurate control of manual water addition and excessive or insufficient water addition. It can easily replenish water for the battery with one key, and automatically shut down by induction, which can effectively ensure the consistency of the water level, effectively improve the efficiency of water maintenance, and ensure the consistency of battery unit characteristics after water maintenance. Improve battery performance and service life.