60V BATTERY EQUALIZER

When the battery works in series, due to the battery’s chemical composition,
temperature, self-discharge the difference in the electricity rate causes the
voltage of the battery to be inconsistent, thus causing the battery to lose
balance. This means that one battery may be overloaded while the other is not
fully charged, with the repeated charging and discharging process, the battery
voltage gradually increases, eventually leading to the battery overshoot early
damage.


BE-301 battery equalizer used For 5 batteries in series, connect 24 hours to
the battery system so that the current will flow from the higher voltage to the
lower voltage, making the battery maintain the same voltage when charging
and discharging, and finally extend the overall life of the battery system.
BE-301 battery equalizer is suitable for lead-acid batteries (VRLA). lithium iron
phosphate batteries(LFP), ternary lithium battery, it starts work when the
voltage higher than 2.4v, it means that this equalizer can be used in a single
cell battery range from 2.4V to 12v. One equalizer can connect 4 batteries once
a time, if the battery is less than 4, the extra cable can be vacant ( positive and
negative terminal should be avoided), does not affect the equilibrium effects.
The equalizer is not affected with battery connection way, no matter in series
or in parallel, both can work.

Technical Data

Battery nominal voltage5 * 12V (2.4V~12V)
Working current0-10A
Standby current5mA
Dimension160*69*28mm
Working temperature-20℃~+50℃
ProtectionReverse polarity protection
Connecting lineLength50cm Terminalφ8mm/φ10mm
Technical Data

Installation Size

60V Battery Equalizer
60V Battery Equalizer
Battery Equalizer 60V
Battery Equalizer 60V

Battery Balancer 60v
Battery Balancer 60V

INSTALLATION

1.Black cable connect negative/-pole
2.Red cable connect positive/+ pole
3.When the battery pack is less than 5, the additional cable can be suspended (the
positive and negative ends should be avoided), which does not affect the equalization
effect.

NOTE

1.Please read the instructions before installing the equipment.
2.Before connecting to the equalizer, please confirm the positive and negative electrodes
of the battery pack to avoid short circuit between the terminals of the equalizer.

HUBEI LHNY ENERGY TECHNOLOGY.CO.,LTD.
Add: NO.35xiwang Rd(Free Trade Area), Auto Industrial park, Hi-tech District, xiangyang, Hubei, China Post:441000

发表评论

您的电子邮箱地址不会被公开。 必填项已用 * 标注