Lead-acid battery maintenance work, it is worth paying attention to the battery water problem, battery water shortage will affect the battery service life. Many maintenance personnel adds water to lead-acid batteries manually, which often causes problems such as inaccurate water-adding control, and excessive or insufficient water-adding. In view of the above situation, to introduce a safe and efficient way to add water, let’s take a look.
Science: What is a lead-acid battery?
The electrode is made of lead and its oxide. The electrolyte is a kind of battery with the sulfuric acid solution. In the discharge state, the important component of the positive electrode is lead dioxide, and the important component of the negative electrode is lead; Charging status, is an essential ingredient of the cathode are lead sulfate, into the exhaust type battery and maintenance-free lead-acid batteries, battery important by tubular positive plate and negative plate, electrolyte, separator, battery case, battery cover, column, filler cap, etc, rooms are lead-acid storage battery commonly used, usually with a UPS backup power supply, computer room equipment power supply.
The lead acid battery in what case to water?
1. the capacity of the lead acid battery decreased to less than 20%, and water shortage is serious, must be filled with water.
2. Lead-acid batteries whose capacity drops below 40% or above 20% are short of water. It is recommended to repair them by replenishing water.
3. the capacity decreased to below 60%, more than 40% of the lead acid battery water shortage is not much, if there are conditions to refill the battery repair effect will be better.
4. the capacity of less than 60% of the basic water shortage, no need to supplement.
The amount of water replenishment of the six single cells of the lead-acid battery should not differ much when normal. The specific amount of water replenishment for each lead-acid battery depends on the degree of water loss of the lead-acid battery. In short, in the whole repair process should ensure that there is a flow of electrolytes in each cell of the lead-acid battery.
Method of adding water to lead-acid batteries
1. Artificial water refill
Artificial filling water is a user needs a battery hydrating, at the end of the charging time, our staff can see the forklift battery electrolyte liquid level height, if lower than the lowest level, this time we need artificial filling water, who can use the syringe to add water for the battery, a water inlet is too much, no more than the minimum level.
2. Automatic water refill
The operation can be carried out with the help of professional water-adding tools, such as lead-acid battery water filling tool: battery water gun, which can make the maintenance of battery watering conveniently, safely and efficiently. It can easily add water with one click, which is safe and convenient. At the same time, it can also help control the liquid level, ensure the balance of battery characteristics, and extend the service life of the battery.
Battery water gun is a patented product independently researched and developed by Hubei Lham Energy Tech Co., Ltd. . It is a special tool for adding water to lead-acid batteries. It can make the water-adding maintenance work more efficient and convenient and plays an important role in the water-adding work of forklift batteries. Hubei Lham Energy Tech Co., Ltd. focuses on battery accessories related business, in the field of automotive battery, industrial battery maintenance has a deep accumulation of technology and practical technology patents, more understanding can pay attention to our official website dynamics.